In this era, many new technologies have emerged for maintaining youthful skin. The XERF program is one of the innovations gaining significant attention for skin rejuvenation and facial lifting. However, many people still have questions: What is XERF? Is it effective? How does it differ from traditional skin tightening devices? This article will help you get to know the XERF machine to provide information for choosing the right skin care for yourself.
Key Takeaways
- The XERF program is a new generation of Monopolar RF technology that combines two frequencies (Dual-Frequency). It helps reduce excess fat and helps stimulate collagen deep within the skin layers.
- What does XERF help with? Primarily, it addresses sagging skin, deep nasolabial folds, uneven skin texture, and enlarged pores. It also helps with jawline contouring, reducing double chin fat, and lifting the face for a more defined look.
- After the procedure, you will start to notice changes of about 20-30% initially, and will see the full results of collagen production within 2-3 months.
What is the XERF Program?
XERF (Surf) is an innovative XERF skin tightening machine. It is a new model that uses high-frequency radio waves (RF) to deliver energy deep into the skin layers. Its highlight is the Dual-Frequency RF technology, which releases both 2MHz and 6.78 MHz frequencies in a single shot, setting it apart from other Monopolar RF machines on the market. This allows thermal energy to be delivered across 3 skin layers to stimulate collagen production and restructure the skin from within.
In addition to the fact that the XERF program helps tighten the skin, reduce fine lines, and increase plumpness for a more refined texture, this technology also has the ability to reduce excess fat, reduce cheek fat, and reduce a double chin. It helps contour the jawline and makes the skin feel firmer and tighter in one device.
Is XERF a Laser or RF Technology?
Let’s clarify this before you decide. Many people often misunderstand that XERF works with lasers. In reality, this machine is not a laser; it works with Radio Frequency (RF) energy. RF waves focus on delivering heat beneath the skin to stimulate collagen and reduce fat without damaging the outer skin layer.
How does XERF work to tighten the skin?
The working principle of the XERF machine relies on delivering Dual-Frequency Monopolar RF energy. The addition of the 2 MHz frequency allows the energy to penetrate deeper than machines that only use 6.78 MHz.
When the energy converts to heat in the deep fat layers and the SMAS layer, sagging collagen fibers contract, which often makes clients feel that their skin looks tighter immediately after the procedure. Additionally, it stimulates Fibroblast cells, which are the source of collagen and elastin. Regular skin care with this method helps the skin structure become denser and stronger without causing any wounds.
Key Highlights of the XERF Program You Should Know
This technology is gaining popularity because of the advantages of XERF that address multiple skin concerns, including:
- Dual-Frequency RF (6.78 MHz + 2 MHz): The 6.78 MHz frequency helps stimulate collagen in the upper and middle layers, while the 2 MHz frequency delivers energy deep into the fat layer to help reduce excess fat and contour the face for a slimmer look.
- Integrated Cryogen Delivery: Features an intelligent cooling system that protects the upper skin layer, allowing for the continuous use of optimal energy levels while reducing pain and increasing comfort during the procedure.
- Spider Web Pattern Tip : The spider web pattern tip helps distribute heat comprehensively and evenly, reducing localized heat buildup and ensuring effective skin care.
- Wave Fit Pulse Technology : Delivers energy with high stability, providing excellent control over depth and temperature for consistent results in every treated area.
Where does the XERF machine come from, and how can you tell if it's authentic?
The XERF skin tightening machine was developed and manufactured by Cynosure Lutronic (USA) in collaboration with a South Korean research team and is US FDA cleared. To verify an authentic machine, look for the XERF brand logo on the device, a display screen that clearly shows the number of shots and temperature, and a tip that must be unboxed fresh before every use to ensure skin care standards.
What does XERF help with?
The XERF machine covers a wide range of facial contouring and skin health concerns, primarily including:
- Sagging Skin Issues: Lifts skin that has sagged over time to look firm and youthful again.
- Deep Wrinkles: Addresses nasolabial folds, tear troughs, and fine lines around the eyes that make the face look tired.
- Localized Fat Accumulation: Reduces fat in the cheeks or under the chin, helping the jawline look more defined.
- Lack of Firmness and Enlarged Pores: Stimulates collagen for smoother skin and smaller-looking pores.
- Overall Skin Health: Improves skin condition to look radiant and bright, reducing dullness caused by cell deterioration.
Who is XERF suitable for?
Now that you know what the XERF machine is, let’s check who XERF is suitable for to ensure your skin care meets your needs.
- Those with sagging skin issues who want a non-surgical lifting method that shows results.
- Those who want to reduce nasolabial folds or fine lines and want smoother-looking skin.
- Those who want to reduce cheek fat, a wide face, or double chin fat and want to contour the jawline to look sharp.
- Those who have previously had Ulthera or Oligio X and are looking for a supplementary program to make the face look tighter while helping to reduce fat in the cheeks and under the chin.
- Those concerned about pain, as this machine is designed to feel more comfortable on the skin.
- Those who have no time for recovery; the procedure doesn’t take long, and you can resume your normal life immediately.
Who should not undergo the XERF program?
- Pregnant or breastfeeding women.
- Those with a pacemaker.
- Those with skin inflammation, open wounds, or infections in the treatment area.
- Those with certain chronic skin diseases.
Note: You should always inform the doctor of your health history and have your skin condition assessed before the procedure.
How does the XERF program differ from other skin tightening machines?
For the question many people have: What is XERF, and how does it differ from other Monopolar RF machines? You can see a summary comparison of the features of each type of skin tightening machine in the table below to help make your decision easier.
Features | XERF | Ulthera (MFU-V) | Ultraformer III (MMFU) | Oligio (Monopolar RF) | Thermage (Monopolar RF) |
Wave Technology | Dual-Frequency Monopolar RF (6.78 MHz + 2 MHz) | Micro-Focused Ultrasound (MFU-V) | Micro & Macro Focused Ultrasound (MMFU) | Monopolar RF (6.78 MHz) | Monopolar RF (6.78 MHz) |
Target Skin Layers | Delivers energy across skin layers, collagen, and fat layers down to deep levels and is US FDA cleared. | Penetrates deep into the SMAS layer and is considered the Gold Standard and US FDA cleared. | Delivers energy to the skin and SMAS layers. | Focuses on delivering energy to the skin and collagen layers. | Delivers thermal energy to the skin and fat layers. |
Skin Care Highlights | Helps with jawline contouring and delivers thermal energy at two frequencies. | Helps support and lift the skin structure at the SMAS layer. | Helps with sagging and facial contouring. | Helps with early-stage skin sagging. | Helps with the firmness of the skin and fat layers. |
Suitability | Suitable for those who want to contour the jawline and manage excess fat. | Suitable for those with sagging skin issues in the deep skin structure. | Suitable for those starting skin care and wanting to contour the face. | Suitable for those with early-stage skin sagging. | Suitable for those who want to increase the firmness of the skin layers. |
XERF Program Procedure and Pre-Treatment Preparation
Understanding the steps of the XERF skin tightening machine and proper skin care before deciding to undergo the procedure will increase your confidence and help restore healthy-looking skin.
Preparation Before XERF Skin Tightening
Before receiving the service, you should avoid skin scrubs or using exfoliating products (AHA/BHA), avoid intense sun exposure, and if you have previously had fillers, thread lifts, or other procedures, you should always inform the doctor beforehand.
Procedure Steps and Duration
It begins with the doctor assessing skin concerns, cleaning the face, and marking the treatment areas. Then, a cooling gel is applied, and the energy is delivered to the skin. Generally, it takes about 40-60 minutes, depending on the number of shots and the treated area.
Oligio Program
The Oligio program is a Monopolar RF technology similar to the XERF program. However, the difference between XERF vs Oligio is that Oligio uses a single RF frequency of 6.78 MHz, which penetrates less deeply than the XERF machine, making it suitable for those with early-stage sagging. The XERF program is better suited for cases requiring fat reduction alongside skin tightening, which demands higher precision.
How to take care of yourself after XERF skin tightening?
To ensure effective skin restoration, you should follow these post-treatment care steps:
- Drink enough clean water: 2-3 liters a day helps keep skin cells hydrated and stimulates collagen production.
- Avoid intense heat: Refrain from saunas or strong sun exposure for the first 1-2 days.
- Avoid skin exfoliation: Refrain from skin scrubs or using AHA/BHA for at least 3-5 days.
- Apply sunscreen regularly: Protect your skin and the newly forming collagen.
- Avoid other thermal procedures: Wait at least 1-2 weeks before using other heat-based devices.
- Maintain normal skin care: You can use skincare products that help add moisture to enhance the effectiveness of the XERF program.
Where is the best place to get XERF?
If you have skin concerns and are looking for where to get XERF, you should consider the following criteria:
- Performed by a doctor who provides a facial assessment before every treatment.
- The clinic uses authentic machines and standard tips with verifiable sources.
- Clear details regarding XERF pricing and the number of shots used are provided before starting.
- Real user review photos comparing results are available.
- Close follow-up service is provided after the treatment.
How much does XERF cost?
Update on great value skin care packages. The assessment of the XERF program in terms of price depends on the number of shots the doctor assesses as suitable for each individual’s skin concerns. The XERF machine packages at TALISA Clinic are as follows:
- XERF Program 300 shots: Price 25,000 Baht
- XERF Program 400 shots: Price 33,000 Baht
- XERF Program 600 shots: Price 49,000 Baht
Additionally, there are packages paired with the Ultraformer III program for more comprehensive V-Shape jawline care:
- XERF 300 shots + Ultraformer 400 shots Price 29,990 Baht
- XERF 600 shots + Ultraformer 400 shots Price 52,990 Baht
Note: Results depend on the doctor’s discretion and individual response.
XERF Machine: Turning Sagging into Firm, Youthful-Looking Skin
The XERF program is considered a new generation Monopolar RF skin tightening machine that combines Dual-Frequency RF to deliver energy deep into 3 skin layers, addressing sagging, increasing plumpness, and reducing accumulated fat, all with a cooling system for skin comfort.
TALISA Clinic provides the XERF skin tightening service with highlights that ensure your self-care is full of confidence. The clinic operates legally with a verifiable license number, offering a clean, private atmosphere for relaxation throughout the service. Every case is handled by a doctor who understands facial structure and designs treatments to meet individual needs, using standard machines and tips that can be verified. We provide detailed consultations before starting and closely monitor results.
For more information, please contact us.
- LINE: @talisaclinic
- Instagram: talisaclinic
- Facebook: TALISA Clinic
- Tel: 062-486-3626
Frequently Asked Questions about the XERF Skin Tightening Machine (FAQs)
Q: How many XERF sessions are needed to see results?
A: You can notice changes in the skin looking tighter from the very first session. Initially, you will see about a 20-30% change, and the results from collagen production will be fully apparent after 2-3 months.
Q: How long does XERF last?
A: Regarding the question of how long XERF lasts, the results of skin rejuvenation and collagen can last for about 1 year. This depends on the original skin condition, lifestyle habits, and post-treatment care of each individual.
Q: Does XERF have side effects?
A: XERF is a non-invasive technology that delivers thermal energy beneath the skin without causing wounds. The device has a cooling system and monitors skin temperature for comfort during the procedure. When performed by a doctor who understands skin structure, the risk of side effects and redness or burns is significantly reduced.
Q: Can men undergo the XERF program?
A: Men can also undergo the procedure. The doctor will assess and adjust the energy delivery to suit the facial structure and skin thickness of men, which often focuses on contouring the jawline and reducing fat under the chin for a sharper look.
Q: At what age can I start XERF skin tightening?
A: Generally, you can start skin care from the age of 25, which is when the rate of collagen production begins to decrease. However, individual skin condition and wrinkle concerns are more important than age, so we recommend a professional skin assessment first.
Q: Is it good to do XERF on areas other than the face?
A: Yes, because in addition to the face, this machine can be used on the neck and under the chin to help tighten sagging skin and reduce localized fat accumulation. The number of shots will be adjusted according to the treated area.
Q: Can I do XERF if I have fillers or a thread lift?
A: It is necessary to inform the doctor of your procedure history every time. However, you can undergo the XERF program as usual, as the thermal energy will not affect previously injected fillers or dermal fillers.
References
XERF – Structural Skin Tightening. (n.d.). Cynosure Lutronic. https://www.cynosure.com/xerf/
XERF Effector. (n.d.). Xerf kr. https://xerf.kr/en/
LaMond, D. (2026, February 3). Introducing XERF RF Therapy: Advanced Collagen Remodeling for Skin Tightening Without Surgery. DermaBlue. https://dermablue.com/introducing-xerf-rf-therapy-advanced-collagen-remodeling-for-skin-tightening-without-surgery/
ทำความรู้จักผู้เขียน
